Gtechniq C0 Aero Coat

Strong anti-adhesion properties
Hydrophobic function
Ideal for race and track cars

C0 has been formulated to minimise adhesion of foreign objects on race cars. However, it can also be used on road cars with a lifespan of up to 2 years.

It offers great gloss, good hydrophobicity (110 degrees), some swirl resistance (6h) and can be applied to paint and gel coat.

Please note: compared to our other coatings C0 Aero Coat is relatively hard to apply. The product is quite viscous and requires considerably more effort when removing residue – we recommend you will need at least 10 MF1 ZeroR Microfibre Buff Cloths to carry out one application.

C0 can be applied as a stand-alone product or topcoat for other Gtechniq permanent paint protection.

Additional Information
Storage and Use	Shake well before use and apply out of direct sunlight Wear gloves Dab the product onto the AP2 Ultra Soft Foam Filled Microfibre Applicator Pad provided Replace the lid on the bottle and set aside- as holding in your hand can promote premature curing Apply product to a large size panel, or several smaller panels Leave for 2-3 minutes and remove residue with an MF1 ZeroR Microfibre Buff Cloth, then conduct a second buff with an MF6 Haze Buster or another MF1 Make sure that all cloths used are rotated quickly so that the coating does not partially cure in the cloth If you miss removing residue and it cures fully, it will need to be re-polished and the coating reapplied to the area As soon as you finish put the microfibres in water, wash and dry them as soon as possible – if not the product will crystallise on the cloth Allow the coating to cure for 12 hours, before exposing the car to the elements Store in a cool, dry place Use within 3 months of opening

Additional Information

Storage and Use

Shake well before use and apply out of direct sunlight Wear gloves Dab the product onto the AP2 Ultra Soft Foam Filled Microfibre Applicator Pad provided Replace the lid on the bottle and set aside- as holding in your hand can promote premature curing Apply product to a large size panel, or several smaller panels Leave for 2-3 minutes and remove residue with an MF1 ZeroR Microfibre Buff Cloth, then conduct a second buff with an MF6 Haze Buster or another MF1 Make sure that all cloths used are rotated quickly so that the coating does not partially cure in the cloth If you miss removing residue and it cures fully, it will need to be re-polished and the coating reapplied to the area As soon as you finish put the microfibres in water, wash and dry them as soon as possible – if not the product will crystallise on the cloth Allow the coating to cure for 12 hours, before exposing the car to the elements Store in a cool, dry place Use within 3 months of opening

C0 Aero Coat

Brand: Gtechniq
Product Code: GC0
Availability: In Stock With Supplier

$99.00
$90.00

Available Options

Select Size

30ml

50ml (+$50.00)

Qty

Gtechniq C0 Aero Coat

C0 Aero Coat

$90.00

Available Options

Related Products

AP1 Lint-free Applicator Pad (10 pack)

MF1 ZeroR Microfibre Buff Cloth

MF6 Haze Buster Microfibre Cloth